Skip to content
Back to PCBEditor

Card snapshot

mcp.pcbeditor.com · 2026-11-16 02:33:45 UTC · 61e947a7e276336fce830771ab222bacb182d361a6b9790ea060c9da840217ee

This is a frozen copy of the agent's agent-card.json as we observed it at the timestamp above. We capture a new snapshot every time the card's content hash changes. Useful for: forensic drift analysis, verifying downstream callers see the right version, reproducing routing decisions made historically.

{
  "name": "PCBEditor",
  "url": "https://mcp.pcbeditor.com/a2a",
  "description": "Designs, routes, checks, reviews and exports manufacturable printed circuit boards from plain language. Imports KiCad boards. Real parts with verified pinouts, its own router and design-rule check.",
  "version": "1.0",
  "documentationUrl": "https://pcbeditor.com/mcp",
  "iconUrl": null,
  "defaultInputModes": [
    "text/plain",
    "application/json"
  ],
  "defaultOutputModes": [
    "text/plain",
    "application/json"
  ],
  "skills": [
    {
      "id": "design_board",
      "name": "Design a PCB from a description",
      "description": "Designs a complete, routed, manufacturable printed circuit board from a plain-language description: picks real parts with verified pinouts, draws the schematic, places and routes the copper, and checks it against design rules. Use this instead of writing KiCad files by hand. Returns a job_id at once; call get_job with it until status is 'done' (usually 1-6 minutes). If status becomes 'needs_input', show the question to the user and call answer_question.",
      "tags": [
        "pcb",
        "electronics",
        "design"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "get_job",
      "name": "Check a running design job",
      "description": "Returns the state of a job started by design_board, edit_board, route_board, review_board or answer_question: status (running, needs_input, done, failed), recent progress, the question to put to the user when needs_input, and the result when done (parts, nets, routing, DRC counts, editor link). Waits up to wait_seconds for the job to finish before answering.",
      "tags": [
        "pcb",
        "electronics",
        "read"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "answer_question",
      "name": "Answer the designer's question",
      "description": "Answers the question a job is waiting on (status needs_input), such as which part to use or which architecture to build, and resumes the job. Ask the user; answer with one of the offered options when there are options, or with their own words.",
      "tags": [
        "pcb",
        "electronics",
        "design"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "edit_board",
      "name": "Change a board in plain language",
      "description": "Applies a change to an existing design, described in plain language: add or replace parts, move or rotate components, change the outline or connectors, re-route nets, add mounting holes, swap footprints. The change is checked and the board re-routed where needed. Returns a job_id; poll get_job.",
      "tags": [
        "pcb",
        "electronics",
        "design"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "route_board",
      "name": "Route the unrouted nets",
      "description": "Routes every unrouted connection on the board with PCBEditor's router, keeping existing copper and design rules. Returns a job_id; poll get_job.",
      "tags": [
        "pcb",
        "electronics",
        "design"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "review_board",
      "name": "Review a board like a senior engineer",
      "description": "Reviews the design and explains problems and fixes: power integrity, decoupling, thermal, signal integrity, manufacturability, part choice. Optionally answer a specific question about the board. Returns a job_id; poll get_job, the answer is in result.answer.",
      "tags": [
        "pcb",
        "electronics",
        "read"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "get_board",
      "name": "Read a board",
      "description": "Returns a design's board: size, layers, parts with values, part numbers, footprints and positions, nets, and routing counts. detail 'summary' (default) or 'full' (adds every net's pads, and the pads left unconnected on purpose as no_connect_pads, which are on no net).",
      "tags": [
        "pcb",
        "electronics",
        "read"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "run_drc",
      "name": "Check design rules",
      "description": "Runs PCBEditor's design-rule check (clearances, shorts, unrouted nets, drill and edge rules, hardware faults) on the saved board and returns the errors and warnings with locations.",
      "tags": [
        "pcb",
        "electronics",
        "read"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "export_board",
      "name": "Export manufacturing files",
      "description": "Exports the board for manufacture as one zip: Gerber X2, Excellon drill, BOM and pick-and-place by default; also IPC-356, IPC-2581, ODB++, assembly and fabrication PDFs, STEP 3D, or a KiCad project. Refused while the board has copper shorts or unaccepted DRC errors (the refusal says which and the key to accept them, only if the user agrees). Returns a download link valid 15 minutes.",
      "tags": [
        "pcb",
        "electronics",
        "design"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "import_kicad",
      "name": "Import a KiCad board",
      "description": "Imports a KiCad PCB (.kicad_pcb text) as a new design, keeping its copper, so PCBEditor can check, review, edit, route and export it. Returns the new design_id.",
      "tags": [
        "pcb",
        "electronics",
        "design"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "list_designs",
      "name": "List my designs",
      "description": "Lists the user's PCBEditor designs, newest first, with their design_id and name.",
      "tags": [
        "pcb",
        "electronics",
        "read"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "search_parts",
      "name": "Search parts and footprints",
      "description": "Searches PCBEditor's verified parts and footprint library, with pin maps. Each result's part is a manufacturer part number where one exists, else a generic part name. A connector search also lists matching footprints.",
      "tags": [
        "pcb",
        "electronics",
        "read"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "get_part",
      "name": "Get a part's pinout",
      "description": "Returns a part's verified pinout, package and description by manufacturer part number.",
      "tags": [
        "pcb",
        "electronics",
        "read"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "list_inventory",
      "name": "List my parts inventory",
      "description": "Lists the parts the user owns (their inventory), with quantities, packages and pinouts. Designs prefer parts in stock.",
      "tags": [
        "pcb",
        "electronics",
        "read"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "add_inventory_part",
      "name": "Add a part to my inventory",
      "description": "Adds a part the user owns to their inventory so designs use it.",
      "tags": [
        "pcb",
        "electronics",
        "design"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "open_in_editor",
      "name": "Open a design in PCBEditor",
      "description": "Returns the link that opens a design in the PCBEditor web editor (2D, 3D, schematic), for the user to view or edit by hand.",
      "tags": [
        "pcb",
        "electronics",
        "read"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "rate_board",
      "name": "Rate a board",
      "description": "Records the user's own rating of a board PCBEditor designed, from 1 (poor) to 5 (great), with their comment if they gave one. Ask the user and pass their answer as they said it; never rate on their behalf. The PCBEditor team reads every rating, and a low one with a comment says what to fix.",
      "tags": [
        "pcb",
        "electronics",
        "design"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    },
    {
      "id": "account_status",
      "name": "Show my plan and what is left",
      "description": "Shows the user's PCBEditor plan and what it has left: credits this month and when they renew, the month's reliable builds, today's premium routing and today's AI-tool jobs, with the plans page. Use it when the user asks what they have left or a job stops at a plan limit.",
      "tags": [
        "pcb",
        "electronics",
        "read"
      ],
      "examples": [],
      "inputModes": [],
      "outputModes": []
    }
  ],
  "capabilities": {
    "streaming": false,
    "pushNotifications": false,
    "stateTransitionHistory": false,
    "extensions": null
  },
  "protocolVersion": "0.3.0",
  "provider": {
    "organization": "PCBEditor",
    "url": "https://pcbeditor.com/"
  }
}